Everything I have received from Outlier is of the highest quality I could hope for. Just ordered my 5th barrel from outlier and I have no doubt it will perform well. Also have an Outlier chassis which is is also impressive! Keep up the good work, Outlier!

I have several optics and just received my first LH model scopes. I also have the chassis system for my savage long range Hunter in 338LM, it was simple to assemble looks and works great. Very happy with everything so far. I am waiting on the ops rifle system to come available but I can't find, or I missed it lol. What calibers will in the OPS system?

I decide to try hornaday 108 eldm's in my new .243 winchester barrel. Over 50 percent of them started to spin apart at 25 meters. Talked to expert in QA, swapped to 105 bergers, and 107 nosler, and it's shooting far better than I could. Awesome product and awesome company.

Better communication on outstaing orders, a phone # would be nice to call and speak with tech services or order issues. Love the price and product so far but un able to use product because of order processing times.

I got this for my hunting rifle: an Ruger American Gen II. It is absolutely solid and I love the built in ARCA rail, plus the whole rig is still only 10.6 pounds!

I got a 26” 1.2” Full Bull in 7mm-08 Rem with Savage small shank. I installed on a savage 110 receiver I had with a shot out .243 barrel. I’m running 180gr ELDM 10 shots at 200 yards in under 3/4”. Action and barrel are in the Outlier chassis with 15” forend, MDT vertical grip, and Luth AR adjustable stock and Arken EP5 7-35x56 scope. I wanted an all Arken-Outlier precision setup and I couldn’t be happier with how the system performs.

Machine quality is great. Can’t wait to get my barrel to try it.

Got to shoot this at SHOT. Very impressive.

I purchased this chassis for a old blind box magazine savage model 12 action I will be using one of your 6mm creedmoor barrels on. For now I have the factory barreled action in it. WOW! It fits like a glove. I love the ability to use parts from other makers on it. It opens doors other leave locked for price reasons. I will order more in the future.

Received in a very timely manner. Came well packaged for the ride. Putting on a small shank Savage 110 installed beautifully threaded perfectly. I have not shot it yet am waiting on the chassis, my only issue is the machining of the overall exterior of the barrel itself it’s a little rough but it may just be me. Really have no complaints of any issues internally well done and that’s the most important part!

Everything I have received from Outlier is of the highest quality I could hope for. Just ordered my 5th barrel from outlier and I have no doubt it will perform well. Also have an Outlier chassis which is is also impressive! Keep up the good work, Outlier!

I have several optics and just received my first LH model scopes. I also have the chassis system for my savage long range Hunter in 338LM, it was simple to assemble looks and works great. Very happy with everything so far. I am waiting on the ops rifle system to come available but I can't find, or I missed it lol. What calibers will in the OPS system?

I’ve purchased four Outlier chassis over as many years. First two were early Gen 1? without arca cut in the poorly execute attachment of handrail and a lousy stock, but the core fit to our Rem 700 & Savage110 receivers almost perfectly. #3 was what I’m guessing was Gen 2. The Gen 2 stock was a dramatic improvement with much improved check rest and the bag rider options. The handrail with arca was a great addition. Chassis #4..I just received what I assumed is a Gen 3 for a Howa 1500 sa. The Gen 3 is worth more than what I paid. Handrail attachment is solid. The fit to the rifle receiver is perfect. Only one complaint with Gen 3 Howa is the cut out for the front action screw is oval but without the correct offset washer and the recoil lug is not locked in tight forcing the tang action screw to restrict the rifle forward movement.

Lefthand chassis?

Do you have the chassis in Lefthand ?

I received my barrell today 24 inch MTU Black Nitrided! Looks Great! I didn't receive a barrell nut! Would've been 5 stars with a Barrell nut! Very satisfied with look!

I've put outlier 7prc barrel on my Bergara b14 action. It shoots better than factory barrel. With hand loads I can get 0.5-0.8 MOA groups and about 1-1.2MOA with factory lot that I had laying around. It's not a benchrest hammer barrel, but it works well for the price. I ordered another one just to have it once I burn throug the first one. One thing to keep in mind - it's a barrel nut style barrels and the nut is made of soft steel, DO NOT try to torque the barrel nut, torque the action, otherwise you risk screwing flats on the nut.

Chassis is great! Rem 700 short action fit flawlessly. You get a very good deal on the chassis, but they make up for it on the stock and handguard. The fit on the handguard leaves a little to be desired. The lines from the guard and chassis don't exactly line up. And a bit overpriced for a square piece of aluminum with the center milled out.

When can we expect mid-November barrel orders to ship? I understand holidays are adding time. I just need a timeline.

Sure would like to see a left hand model...

I decide to try hornaday 108 eldm's in my new .243 winchester barrel. Over 50 percent of them started to spin apart at 25 meters. Talked to expert in QA, swapped to 105 bergers, and 107 nosler, and it's shooting far better than I could. Awesome product and awesome company.

Better communication on outstaing orders, a phone # would be nice to call and speak with tech services or order issues. Love the price and product so far but un able to use product because of order processing times.

I got this for my hunting rifle: an Ruger American Gen II. It is absolutely solid and I love the built in ARCA rail, plus the whole rig is still only 10.6 pounds!

I got a 26” 1.2” Full Bull in 7mm-08 Rem with Savage small shank. I installed on a savage 110 receiver I had with a shot out .243 barrel. I’m running 180gr ELDM 10 shots at 200 yards in under 3/4”. Action and barrel are in the Outlier chassis with 15” forend, MDT vertical grip, and Luth AR adjustable stock and Arken EP5 7-35x56 scope. I wanted an all Arken-Outlier precision setup and I couldn’t be happier with how the system performs.

Machine quality is great. Can’t wait to get my barrel to try it.

Got to shoot this at SHOT. Very impressive.

I purchased this chassis for a old blind box magazine savage model 12 action I will be using one of your 6mm creedmoor barrels on. For now I have the factory barreled action in it. WOW! It fits like a glove. I love the ability to use parts from other makers on it. It opens doors other leave locked for price reasons. I will order more in the future.

Received in a very timely manner. Came well packaged for the ride. Putting on a small shank Savage 110 installed beautifully threaded perfectly. I have not shot it yet am waiting on the chassis, my only issue is the machining of the overall exterior of the barrel itself it’s a little rough but it may just be me. Really have no complaints of any issues internally well done and that’s the most important part!

I honestly really like the optics, clarity and tracking .Definitely a good all around scope .I will definitely grab another one

so far it is great. went together great and looks good