This barrel is lights out! I have one, just haven’t mounted it yet. I shot my friends today for the first time. The range is 200 yrds, 300 yrds, 400 yrds, 500, yrds, & 700 yrds. I started at the 700 yrds, first shot was high. I corrected my elevation by lowering two sub-tensions…next two, dead center! I’m very impressed with the barrel! In fact, I’m purchasing the .308 Winchester barrel.

24” 7mm-08 barrel married to the full outlier chassis set up. Topped with Arken EP 5 shooting sub 1/2 MOA, 5 shot groups, with the first 40 rounds through the gun. Couldn’t be any happier.

Well, amazing results!! This is with some simple handloads, so that I could break in the barrel. Fit and finish is great! All I can say is you cannot go wrong with OUTLIER!! SERIOUSLY, CAN’T GO WRONG😊 The results that I have, are proof 😲

First barrel had an out of spec chamber. Customer service had me a new, nitrided one shipped in 2 weeks! The new barrel chamber is in spec. It shoots absolute bug holes with the 250 and 230gr Amax. Also got some amazing groups with the 225gr ELDM and 212gr ELDX. I definitely will be ordering another. The gunsmith I had install the barrel mentioned that nitride coating was super hard and he had destroyed a cutting insert adding a step to the muzzle, so my surpressor adapter would fit. He said if they had perfected nitriding the bore itself, you'd be hard pressed to "shoot that barrel out"!! I have 200rounds on it so far, time will tell.

+ 2

Attached mine to the Buttstock and it makes a great lightweight addition. Simple and easy to install. Slides right on the bag .

first barrel had an issue, outlier very helpful and got a replacement out fast

Just got my 6 Creedmoor competition barrel. This thing is super nice! Can't wait to get it on the gun and go shoot with it! Keep up the good work!!

I ordered one of the Outlier chassis about 4 months ago from Arken and I noticed last week that one of the tips of the magazine release had broken off some how, I contacted Outlier and told them and they sent me a brand new mag release with the spring and pin the next day with no questions asked, it was at my house within 3 day's. I've never had customer service so good from any company. Keep up the good work .

Outlier Customer Service answers my emails same day, or faster. The prices are unbeatable. The accuracy is top tier. I love my .243 Win build! It'll be half MOA or better with load development. It's sub MOA with everything I've given it out to 300 yards. (my range is 300) There is also 6 or 7 Arken Scopes in my shooting group, I have 2. There is no better precision barrel, chassis, and scope build option available for anywhere near the cost of what can be done with Outlier and Arken.

I purchased a 26" 6mm Creedmoor barrel for a Ruger American. Delivery was in three weeks from order date. The packaging was great. The barrel and nut quality is very nice. I installed the barrel and head spaced with go-nogo gauges. After two sight in shots I shot two 3-shot groups with new 108gr ELDM's, first was 0.52" and the second 0.51". Avel=2950 ft/s SD=11 I also shot a 1.10" 7 shot group with some left over reloads (70gr Nosler BT) using once fired FL resized Nosler brass. Avel=3541 ft/sec SD=11 Anyway, all is good and ready for some load development. Very happy thanks.

Well, amazing results!! This is with some simple handloads, so that I could break in the barrel. Fit and finish is great! All I can say is you cannot go wrong with OUTLIER!! SERIOUSLY, CAN’T GO WRONG😊 The results that I have, are proof 😲

I ordered one of the Outlier chassis about 4 months ago from Arken and I noticed last week that one of the tips of the magazine release had broken off some how, I contacted Outlier and told them and they sent me a brand new mag release with the spring and pin the next day with no questions asked, it was at my house within 3 day's. I've never had customer service so good from any company. Keep up the good work .

Outlier Customer Service answers my emails same day, or faster. The prices are unbeatable. The accuracy is top tier. I love my .243 Win build! It'll be half MOA or better with load development. It's sub MOA with everything I've given it out to 300 yards. (my range is 300) There is also 6 or 7 Arken Scopes in my shooting group, I have 2. There is no better precision barrel, chassis, and scope build option available for anywhere near the cost of what can be done with Outlier and Arken.

Will there be a winchester model 70 pre fit available?

Very impressed with the chassis system. Using. Remington 700 action and I already have a bull barrel in 6 mm Remington but I am ordering a barrel soon. I will take it out soon to try it. I by mistake ordered a Remington 783 chassis but I’m keeping it for another rifle. I am impressed with the return emails when I have questions. Thank you and will be buying more. Really like the 2 Arken Scopes I have.

Everything I have received from Outlier is of the highest quality I could hope for. Just ordered my 5th barrel from outlier and I have no doubt it will perform well. Also have an Outlier chassis which is is also impressive! Keep up the good work, Outlier!

I have several optics and just received my first LH model scopes. I also have the chassis system for my savage long range Hunter in 338LM, it was simple to assemble looks and works great. Very happy with everything so far. I am waiting on the ops rifle system to come available but I can't find, or I missed it lol. What calibers will in the OPS system?

I’ve purchased four Outlier chassis over as many years. First two were early Gen 1? without arca cut in the poorly execute attachment of handrail and a lousy stock, but the core fit to our Rem 700 & Savage110 receivers almost perfectly. #3 was what I’m guessing was Gen 2. The Gen 2 stock was a dramatic improvement with much improved check rest and the bag rider options. The handrail with arca was a great addition. Chassis #4..I just received what I assumed is a Gen 3 for a Howa 1500 sa. The Gen 3 is worth more than what I paid. Handrail attachment is solid. The fit to the rifle receiver is perfect. Only one complaint with Gen 3 Howa is the cut out for the front action screw is oval but without the correct offset washer and the recoil lug is not locked in tight forcing the tang action screw to restrict the rifle forward movement.

Lefthand chassis?

Do you have the chassis in Lefthand ?

This barrel is lights out! I have one, just haven’t mounted it yet. I shot my friends today for the first time. The range is 200 yrds, 300 yrds, 400 yrds, 500, yrds, & 700 yrds. I started at the 700 yrds, first shot was high. I corrected my elevation by lowering two sub-tensions…next two, dead center! I’m very impressed with the barrel! In fact, I’m purchasing the .308 Winchester barrel.

24” 7mm-08 barrel married to the full outlier chassis set up. Topped with Arken EP 5 shooting sub 1/2 MOA, 5 shot groups, with the first 40 rounds through the gun. Couldn’t be any happier.

First barrel had an out of spec chamber. Customer service had me a new, nitrided one shipped in 2 weeks! The new barrel chamber is in spec. It shoots absolute bug holes with the 250 and 230gr Amax. Also got some amazing groups with the 225gr ELDM and 212gr ELDX. I definitely will be ordering another. The gunsmith I had install the barrel mentioned that nitride coating was super hard and he had destroyed a cutting insert adding a step to the muzzle, so my surpressor adapter would fit. He said if they had perfected nitriding the bore itself, you'd be hard pressed to "shoot that barrel out"!! I have 200rounds on it so far, time will tell.

+ 2

Attached mine to the Buttstock and it makes a great lightweight addition. Simple and easy to install. Slides right on the bag .

first barrel had an issue, outlier very helpful and got a replacement out fast

Just got my 6 Creedmoor competition barrel. This thing is super nice! Can't wait to get it on the gun and go shoot with it! Keep up the good work!!

I purchased a 26" 6mm Creedmoor barrel for a Ruger American. Delivery was in three weeks from order date. The packaging was great. The barrel and nut quality is very nice. I installed the barrel and head spaced with go-nogo gauges. After two sight in shots I shot two 3-shot groups with new 108gr ELDM's, first was 0.52" and the second 0.51". Avel=2950 ft/s SD=11 I also shot a 1.10" 7 shot group with some left over reloads (70gr Nosler BT) using once fired FL resized Nosler brass. Avel=3541 ft/sec SD=11 Anyway, all is good and ready for some load development. Very happy thanks.

A very good company I was in the area so I went to see how the company look talking to one of the owners he asked me where I was from I told him Arkansas my order was not ready, but since I had came all that way, he made it happen for me the 6.5 Creedmoor barrel that I received from him, got it put on the other day zero rifle now it’s a tack driver couldn’t be more happy. If you’re thinking about rebelling a rifle. This is the company do it with.

+ 2

243 win 22 inch 1.2" barrel - Shoots 3/4 MOA with 75gr Hornady Superformance Vmax all day long. Excellent product.

Ordered a .308 win barrel for my Howa 1500. Although I don’t understand full bull at the time, the 7 lbs barrel is a rock with built in laser. Casually spotting hits with max load 308s is not usual. Did a ladder test changing depths from .17 to .40 off the lands; out of 10 groups: average .6 “ Two at .43 and largest outlier and single group being .9 It flat shoots. This is with my first picks of varget and 175 gr nosler RDF. Additional testing got a group under .3